Experimental research on flame spectra of methane-coal dust explosions

The significance of experimental research on flame spectra of methane-coal dust explosions is explained. Weak explosions of methane-coal dust-air mixtures were carried out in a large-scale tube of Ø 200 cm×2900cm with one end open, and the absolute radiation intensities as well as their variation under different conditions for characteristic wavelengths of 0.8875, 1.000, 1.505, 2.801, and 4.346μm were obtained by using small angle of view and a multichannel detector developed by us. The experimental results are discussed and compared with those published abroad. Based on the absolute radiation intensity measured at wavelength 4.346μm and the selected blackbody radiation model, the temperature of explosion flame was determined. The results obtained are not only of great practical importance to the industry but may also be used in the study of flame and chemical kinetics.     

A new photoelastic model for studying fatigue crack closure

The photoelastic analysis of crack tip stress intensity factors has been historically developed for use on sharp notches in brittle materials that idealize the cracked structure. This approach, while useful, is not applicable to cases where residual effects of fatigue crack development (e.g., plasticity, surface roughness) affect the applied stress intensity range. A photoelastic model of these fatigue processes has been developed using polycarbonate, which is sufficiently ductile to allow the growth of a fatigue crack. The resultant stress field has been modeled mathematically using the stress potential function approach of Muskhelishvili to predict the stresses near a loaded but closed crack in an elastic body. The model was fitted to full-field photoelastic data using a combination of a generic algorithm and the downhill simplex method. The technique offers a significant advance in the ability to characterize the behavior of fatigue cracks with plasticity-induced closure, and hence to gain new insights into the associated mechanisms.     

Electro-osmotic pore pressures in soil due to an alternating electrical field

Pore pressure development in a soil specimen due to electro-osmosis under alternating current conditions is examined theoretically. Solutions to the governing equation are derived for one-dimensional flow with boundary conditions corresponding to an impervious (conventional no-flow boundary), a partially drained boundary, and a partially drained boundary with an intervening permeable zone between the boundary and the soil. These latter two boundary conditions can arise from details of pore pressure measuring systems at the specimen boundaries during laboratory experiments. An analysis of the solutions indicates that for a perfect no-flow boundary, excess pore pressures measured at an electrode consist of a steady state and rapidly-decaying transient response. The pore pressures exhibit a 45 degree phase shift relative to the applied electric current. The effect of the partially drained boundary is to reduce the peak to peak amplitude of the pore pressure and to increase the phase shift to as much as 90 degrees depending on the compressibility of the pore pressure measuring system. The effect of the impeded and partially drained boundary is to further reduce the amplitude of the pore pressures and to increase the phase shift to as much as 180 degrees depending on the relative permeability of the impeded boundary.     

横观各向同性压电材料中裂纹问题的边界元法

采用Somigiliana公式给出了三维横观各向同性压电材料中的非渗漏裂纹问题的一般解和超奇异积分方程，其中未知函数为裂纹面上的位移间断和电势间断．在此基础上，使用有限部积分和边界元结合的方法，建立了超奇异积分方程的数值求解方法，并给出了一些典型数值算例的应力强度因子和电位移强度因子的数值结果，结果令人满意．     

The crumbling of a viscous prism with an inclined free surface

Summary We study the two-dimensional instantaneous Stokes flow driven by gravity in a viscous triangular prism supported by a horizontal rigid substrate and a vertical wall. The oblique side of the prism, inclined at an angle α with respect to the substrate, is a fluid-air interface, where the stresses are zero and surface tension is neglected. We develop the stream function ψ in polar coordinates (r,θ) centered at the vertex of α and split it into an inhomogeneous part, which accounts for gravity effects, and a homogeneous part, which is expressed as a series expansion. The inhomogeneous part and the first term of the expansion may be envisioned, respectively, as self-similar solutions of the first kind and of the second kind for r→0, each one holding in complementary α domains with a crossover at α _c =21.47^∘, which we study in some detail. The coefficients of the series are calculated by truncating the expansion and using the method of direct collocation with a suitable set of points at the wall. The solution strictly holds for t=0, because later the free surface ceases to be a plane; nevertheless, it provides a good approximation for the early time evolution of the fluid profile, as shown by the comparison with numerical simulations. For 0<α<45^∘, the vertex angle remains constant and the edge remains strictly at rest; the transition at α _c manifests itself through a change in the rate of growth of the curvature. The time at which the edge starts to move (waiting time) cannot be calculated since the instantaneous solution ceases to be valid. For α>45^∘, the instantaneous local solution indicates that the surface near the vertex is launched against the substrate so that the edge starts to move immediately with a power law dependence on time t. However, due to the high value of the exponent, the vertex may seem to be at rest for some finite time even in this case. Received 29 August 1997; accepted for publication 21 January 1998     

锌电极放电过程及失效机制数值分析

锌-空气电池是一种高能量的电池体系.实验表明, 在大功率工作条件下, 锌电极的材料利用率随电流密度的增加而急剧下降. 为探索其在大功率工作条件下的放电机理, 本文针对这一过程建立了一维数学模型, 通过数值求解模拟多个物理量如离子浓度、传递电流密度、电极孔隙度、固体氧化锌等在电极内部的分布变化情况, 在此基础上分析电极的性能. 数值结果分析表明, 固体氧化锌对电极内质量传输过程的限制是导致电极失效的根本原因. 其析出时间及在电极内部的集中分布位置对电极性能有显著影响; 而仅当其体积分数超过30%-35%的范围后才开始显著限制传质过程. 讨论了电极的优化措施, 模拟表明更高的溶液电导率,更大的电极孔隙度有利于增加大功率工作条件下电极的材料利用率. 但最重要的是保持电极内部氢氧根离子的浓度在一个较高的值,对于封闭式电极可以通过补液实现, 理想情况为设计一个电解液循环式的锌电极.     

Effect of ultrasound pretreatment on structural,physicochemical, rheological and gelation properties of transglutaminase cross-linked whey protein soluble aggregates

A solution (10%, w/v) of whey protein soluble aggregates (WPISA) was pretreated with high-intensity ultrasound (HUS, 20 kHz) for different durations (10–40 min) before incubation with transglutaminase (TGase) to investigate the effect of HUS on the structural, physicochemical, rheological, and gelation properties of TGase cross-linked WPISA. Sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) results showed that HUS increased the amounts of high-molecular-weight polymers/aggregates in WPISA after incubation with TGase. HUS significantly increased (P < 0.05) the degree of TGase-mediated cross-linking in WPISA, as demonstrated by a reduction in free amino group contents. HUS significantly increased (P < 0.05) the particle size, intrinsic fluorescence intensity, and surface hydrophobicity of TGase cross-linked WPISA, but had no significant impact (P > 0.05) on the zeta-potential or total free sulfhydryl group content of TGase cross-linked WPISA. The apparent viscosity and the consistency index of TGase cross-linked WPISA were significantly increased by HUS (P < 0.05), which indicated that HUS facilitated the formation of more high-molecular-weight polymers. HUS significantly increased (P < 0.05) the water holding capacity and gel strength of glucono-δ-lactone (GDL)-induced TGase cross-linked WPISA gels. The results indicated that HUS could be an efficient tool for modifying WPISA to improve its degree of TGase-mediated cross-linking, which would lead to improved rheological and gelation properties.     

Analysis of ultrasound-assisted convective heating/cooling process: Development and application of a Nusselt equation

In this study, the convective heating/cooling process assisted by US irradiation is analyzed with the aims of developing a new convective heat transfer correlation. Heat transfer experiments were conducted with different copper machined geometries (cube, sphere and cylinder), fluid velocities (0.93–5.00 × 10⁻³ m/s), temperatures (5–60 °C), and US intensities (0–6913 W/m²) using water as heat transfer fluid. The Nusselt (Nu) equation was obtained by assuming an apparent Nu number in the US-assisted process, expressed as the sum of contributions of the forced convection and cavitation-acoustic streaming effects. The Nu equation was validated with two sets of experiments conducted with a mixture of ethylene glycol and water (1:1 V/V) or a CaCl₂ aqueous solution (30 g/L) as immersion media, achieving a satisfactory reproduction of experimental data, with mean relative deviations of 17.6 and 17.8%, respectively. In addition, a conduction model with source term and the proposed correlation were applied to the analysis of US-accelerated heating kinetics of dry-cured ham reported in literature. Results demonstrated that US improves heating of ham slices because of the increased heat transfer coefficients and the direct absorption of US power by the foodstuff.     

Control of the dynamics of a boiling vapour bubble using pressure-modulated high intensity focused ultrasound without the shock scattering effect: A first proof-of-concept study

Boiling histotripsy is a promising High-Intensity Focused Ultrasound (HIFU) technique that can be used to induce mechanical tissue fractionation at the HIFU focus via cavitation. Two different types of cavitation produced during boiling histotripsy exposure can contribute towards mechanical tissue destruction: (1) a boiling vapour bubble at the HIFU focus and (2) cavitation clouds in between the boiling bubble and the HIFU source. Control of the extent and degree of mechanical damage produced by boiling histotripsy is necessary when treating a solid tumour adjacent to normal tissue or major blood vessels. This is, however, difficult to achieve with boiling histotripsy due to the stochastic formation of the shock scattering-induced inertial cavitation clouds. In the present study, a new histotripsy method termed pressure-modulated shockwave histotripsy is proposed as an alternative to or in addition to boiling histotripsy without inducing the shock scattering effect. The proposed concept is (a) to generate a boiling vapour bubble via localised shockwave heating and (b) subsequently control its extent and lifetime through manipulating peak pressure magnitudes and a HIFU pulse length. To demonstrate the feasibility of the proposed method, bubble dynamics induced at the HIFU focus in an optically transparent liver tissue phantom were investigated using a high speed camera and a passive cavitation detection systems under a single 10, 50 or 100 ms-long 2, 3.5 or 5 MHz pressure-modulated HIFU pulse with varying peak positive and negative pressure amplitudes from 5 to 89 MPa and −3.7 to −14.6 MPa at the focus. Furthermore, a numerical simulation of 2D nonlinear wave propagation with the presence of a boiling bubble at the focus of a HIFU field was conducted by numerically solving the generalised Westervelt equation. The high speed camera experimental results showed that, with the proposed pressure-modulated shockwave histotripsy, boiling bubbles generated by shockwave heating merged together, forming a larger bubble (of the order of a few hundred micron) at the HIFU focus. This coalesced boiling bubble then persisted and maintained within the HIFU focal zone until the end of the exposure (10, 50, or 100 ms). Furthermore, and most importantly, no violent cavitation clouds which typically appear in boiling histotripsy occurred during the proposed histotripsy excitation (i.e. no shock scattering effect). This was likely because that the peak negative pressure magnitude of the backscattered acoustic field by the boiling bubble was below the cavitation cloud intrinsic threshold. The size of the coalesced boiling bubble gradually increased with the peak pressure magnitudes. In addition, with the proposed method, an oval shaped lesion with a length of 0.6 mm and a width of 0.1 mm appeared at the HIFU focus in the tissue phantom, whereas a larger lesion in the form of a tadpole (length: 2.7 mm, width: 0.3 mm) was produced by boiling histotripsy. Taken together, these results suggest that the proposed pressure-modulated shockwave histotripsy could potentially be used to induce a more spatially localised tissue destruction with a desired degree of mechanical damage through controlling the size and lifetime of a boiling bubble without the shock scattering effect.